Slope Stabilization

We provide slope stabilisation services. It covers planning and implementing resistance measures to fill embankments and protection of slopes against failure. Generally, destabilisation of slopes occurs due to two reasons: Natural and Man-made. Natural causes are rainfall, seismic activity, etc whereas Man-made reasons are road construction on hills without risk analysis, blasting to widen roads and other anthropogenic activities.

Ground Improvement

Ground improvement includes the mechanism to rejuvenate ground conditions through mechanical means. The process improves engineering features of the soil mass which is treated for project needs.

Common reasons for ground improvement include:

• •Improve bearing capacity
• •Increase density
• • Control settlements and permeability
• • Mitigate liquefaction
• • Increase slope stability

Soil Nailing

Soil nailing is a part of the slope stabilisation procedure. It protects unstable soil slopes created naturally or through man-made causes. It is used in construction projects for the safe over-steepening of new or existing soil slopes.In this remedial method, reinforcing bars/rods are used as reinforcing elements in the slope.

Rock Bolting

We provide rock bolting for rock excavation works. It is a type of long anchor bolt and helps in stabilising rocks. Rock bolts transfer load from the unstable exterior to the confined interior of the rock mass.

Ground Anchoring

Ground anchors are used for holding, supporting, and restraining civil and ground engineering projects either temporarily or permanently. These anchors need minimal earth disturbance during installation and can be pressurised to an exact grasp capability.

Ground anchors come in multiple capacities and sizes.

Grouting

Grout work is a significant way to control groundwater during civil engineering projects. The process includes the insertion of pumpable materials into a rock or soil structure to transform its physical features.

Grout is generally made of water, sand, and cement and is applied for sealing joints, openings in surfaces, reinforcing existing formations, and filling voids under machine elements.

Shotcrete

Shotcrete is concrete used by spraying. We use spray guns to sprinkle a wet/dry mixture of cement and aggregate. The application of shotcrete in civil engineering projects is making the formation less porous. It makes the bond strong, reduces construction time, and lowers overall cost. .

Geocell Installation

We install geocell for landscaping, civil construction, and road construction. Geocells are expandable panels in 3D formed of high-density Polymer material. It improves the functional and structural pattern of soil and infill components.

Geocells installation helps against erosion, ensures soil stability, protects channels, and reinforces formation for earth retention and load support.

Turfing

As the name suggests, turfing is done on the sides of roads and structures to restrict soil erosion. The peak season for turfing comes generally in the rainy season. It reduces dust and provides a pleasant appearance.

Tunnel Face Consolidation

Tunnel face consolidation prepares for the advanced stabilisation process. It prepares for blasting and drilling, pre-excavation grouting, flexibility adjustment, and protection against unstable soil.

Tunnel Portal Development

Tunnel portal development is one of the toughest tasks, especially in soft rocks and construction in underground structures. Associated risks are surface settlement, collapse, convergence, etc. We at Geogical Structial Infra Pvt Ltd apply the best methods to conduct portal excavation hassle-free.

Pipe Roofing

Pipe roofing is the method of pre-reinforcing the earth before the tunnel face for safe execution of excavation until permanent formations can be installed.

Consolidation Grouting

Consolidation grouting refers to a type of grouting that happens in a rock mass with the purpose of in-filling rock mass inconsistencies. Under the process, site engineers insert a grout element to fill the discontinuities, which are ways through which gases or fluids migrate to rocks.

Tam Grouting

Here TAM stands for Tube a Manchette. TAM grouting process applies a perforated pipe along with a special sleeve grout. These tubes or pipes are inserted into the hole for grouting with minor portions of manchette or rubber sleeve on the exterior portion of the pipe that acts as a one-way valve. The TAM grouting method is applied to consolidate rocks and soils. The method is widely used for geotechnical civil engineering projects.

Micro Piling

Micro Piling provide a reliable support for structures, transferring their load to layers of rock or soil. These layers have sufficient bearing capacity and suitable settlement features. These are perfect for soil stabilisation, slope protection, piling, retrofitting and underpinning projects. Piles of Micro Piling are smaller in diameter, typically ranges between 100 to 250 mm.

Mining

We provide mining services such as drilling, blasting, sizing and transporting the material. We help in breaking up the rock face and continue the mining process.

Earthwork

Earthwork moves massive quantities of soil from a place or to a site. It transforms the topography of the location and needs heavy-duty vehicles to do the same.

Pipeline

Pipeline either for gas or liquid requires a lot of planning and execution. We strategize all the steps and provide the best solutions for your project requirements.

Rock Excavation

We employ the latest and best practices for rock excavation. It involves compacted, cemented, hard components that need blasting or the application of excavating equipment larger than standard excavation works.